Mine equipment
I have priced the machinery separately for buyers that may have their own machinery. The machinery will sell quickly if offered by each piece. We wish to keep the machinery until we know if a buyer of the claims wishes to have the machinery for a turn key mining operation.
The prices may sound quite high, but it cost $20,000 just to get the PC 300 from Edmonton to Dawson. These machines have been well maintained and are in top condition. Transportation to Dawson is a huge cost. Machines can only be hauled on the northern roads during the times that are either frozen or later in the summers. Road restrictions can side line hauling for weeks.
Wash Plant
Trommel with 48 inch wide sluice box. It has a vibrating hopper with a heavy grizzly. It has a stacking conveyor for the tailings. I have processed as much as 60 yards per hour, but it runs best at about 40 yards an hour. The trommel is powered by electricity. $50,000 Cdn
2006 Komatsu PC 300 excavator
2006 Komatsu PC 300 excavator. The engine has less than 200 hours since complete reman. The undercarriage is about 80%. It has a 1.5 yard digging bucket and a 3 yard clean up bucket, a thumb and quick connect. It has an enclosed cab with thermostatically controlled heat and AC. $120,000 Cdn
Cat 966 Loader
966 C Cat loader. The loader is equipped with a 3rd valve so you can change attachments from the seat. It comes with forks, 3.5 yard bucket and an angle blade. The tires have 80% tread. (one tire has a break in the side wall but still holds air OK) There are two spare tires. $90,000 Cdn
Drill
Marooka MST 1100 with a Simco 2800 drill. It comes with about 15, 5 foot long augers and various drill heads for different types of ground. The Marooka carrier has a Komatsu engine. It has very wide rubber tracks. The hydrostatic drive has low hours since rebuild. It is very low ground pressure and only weighs about 10,000 pounds so it fits with the local regulations for prospecting with minimal permits. $75,000 Cdn
Generator
$40 KW Kohler 3 phase generator. With switches , cords and starters $15,000 Cdn
Cat D5H bulldozer
D5H LGP The dozer has an enclosed ROPS cab. It has a 6 way blade and a winch on the back. The under carriage is about 90%. It is sealed and lubricated track group with the extra rails to support the outer edges of the pads. It is designed to work in very soft ground conditions. $75,000 Cdn
Pump
6 inch Gorman Rupp trash pump. It has a 353 Detroit diesel engine on a skid. It has a 15 foot suction hose. $6,000 Cdn
Hose and connectors
There is 200 feet of 6 inch lay flat hose with camlock conectors. There is about 340 feet of 12 inch irrigation pipe with connectors for the 6 inch camlocks.